Do you want to add a touch of vintage style to your wardrobe? Then why not try cutting your sweatshirt in an 80s style? This simple DIY project is an easy way to transform an ordinary sweatshirt into a trendy piece of clothing that will turn heads wherever you go. And the good news is that anyone can do it! In this step-by-step guide, we will show you how to cut an 80s-style sweatshirt that looks amazing and is sure to make a statement.
The first step is to pick out a sweatshirt that you want to cut. Choose a size that fits you well and has the right length. Check the length from the shoulder to the waist, and also measure the length of the sleeves. Once you have your sweatshirt selected, it’s time to start cutting. Before you begin, make sure you have sharp scissors and a marking tool.
Mark the areas where you want to make cuts. Typically, 80s-style sweatshirts feature large cutouts on the neckline, shoulders, and sides. To create these sections in your sweatshirt, use a ruler or measuring tape to mark the desired length and width of the cutouts. The neckline should be wider than the shoulders, and the sides should be longer than the width of the sweatshirt. Take your time to ensure that your marks are even and straight before you start cutting to avoid any mistakes.
Now it’s time to start cutting the sweatshirt. Begin by cutting the neckline along the markings you made with the marking tool. Use long, smooth strokes to create a clean line without any jagged edges. Next, cut the shoulders and the sides of the sweatshirt following your markings. Remember to keep your cuts neat and straight for a polished look. Finally, you can cut off the bottom elastic band or create a fringe by making small cuts along the bottom edge of the sweatshirt.
With these simple steps, you can transform an ordinary sweatshirt into an 80s-style fashion statement that you’ll love to wear. So grab your scissors, follow our guide and get creative with your new 80s-style sweatshirt.
“How To Cut A Sweatshirt 80s Style” ~ bbaz
Introduction
80s-style sweatshirt cutting is one of the most creative ways to revamp your sweatshirt without spending a lot of money. The process involves cutting, knotting, and adding some extra touches to transform an old sweatshirt into a trendy masterpiece. In this article, we will provide a step-by-step guide on how to create an 80s-style sweatshirt by comparing different methods found online.
Supplies Needed
To create an 80s-style sweatshirt, you will need a few supplies including:
- A sweatshirt
- A pair of fabric scissors
- A ruler or tape measure
- Chalk or a pen
- A pair of needle-nose pliers (optional)
The above supplies are standard and required for all the methods that we will define in this article.
Method 1: Off-the-Shoulder Cut
This method requires cutting the neckline off the sweatshirt and making it completely off-the-shoulder.
- Use a chalk or a pen to mark the point on both shoulders where you want to cut the neckline.
- Cut a straight line across the chest following the markings.
- Cut out the collar using the scissors.
- Cut the sleeves diagonally from the arm to the wrist to create a slouchy look.
- Knot the two sleeves on both sides of the waistline to create some shape for the shirt.
Method 2: Lattice Cut
This method involves creating a lace-up design at the front of the sweatshirt using scissors.
- Cut the neckline of the shirt following the off-the-shoulder technique.
- Cut vertical thin strips on the front of the shirt, starting from the collarbone to the waistline.
- Knot the strips into pairs by taking each pair, crossing them over, and pulling one strip through the hole created by the other.
- Repeat the previous step until sweated up with an equal number of knots.
Method 3: Backless Cut
This method is all about cutting the back of the sweatshirt, giving it a backless look.
- Cut the neckline off using the off-the-shoulder technique.
- Cut a straight line from the center of the collarbone to the bottom of the fabric.
- Cut off the strip of fabric you have just created from the two side seams.
- Cut the back portion of the collar out in a deep scoop.
- Create straps by cutting two-inch-wide pieces of fabric from the strips of fabric you cut off earlier.
- Tie the straps together in the centre, at the lower back portion of the top.
Comparison Table
Below is a comparison table for the three methods:
| Method | Difficulty | Time Required | Final Look |
|---|---|---|---|
| Off-the-Shoulder Cut | Easy | 30 minutes | Slouchy tee |
| Lattice Cut | Moderate | 1 hour | Girly and chic |
| Backless Cut | Difficult | 2 hours | Sultry and stylish |
Conclusion
In conclusion, creating an 80s-style sweatshirt using any of the methods above is not only artistic but also a great way to revamp your wardrobe. The steps are simple to follow, and you can use any sweatshirt in your possession to create a unique creation that will make you stand apart from the rest. Choose the method that suits your needs, grab your supplies, and get ready to revamp your wardrobe.
Thank you for taking the time to read our Step-by-Step Guide for 80s Style Sweatshirt Cutting! We hope that this guide was informative and helpful to those who are looking to recreate this fashion trend. Remember, fashion is all about creativity and expression, so don’t be afraid to put your own spin on these techniques!
We understand that cutting an article of clothing can be intimidating, but with the proper tools and techniques, it can be a fun and easy way to upgrade your wardrobe. Whether you’re going for a vintage or modern look, these tips and tricks can elevate any sweatshirt. Plus, it’s a sustainable way to breathe new life into an old garment!
If you’re happy with your newly cut sweatshirt, share your creation with us! We would love to see how you incorporated these techniques into your personal style. Don’t forget to tag us on social media using #80sSweatshirtCutting. Once again, thank you for reading our guide and happy cutting!
Step-by-Step Guide for 80s-Style Sweatshirt Cutting
If you’re looking for a fun and unique way to revamp your old sweatshirts, why not try an 80s-style cut? Here’s a step-by-step guide to help you achieve that retro look:
- Choose a sweatshirt – Look for a plain sweatshirt that you don’t mind cutting up. Make sure it’s not too tight or too loose on you.
- Mark the collar – Use a fabric marker to mark where you want to cut the collar. You can either cut it straight across or create a V-neck shape.
- Cut the collar – Use sharp scissors to cut along the marked line. Be careful not to cut too much off at once, as you can always go back and trim more if needed.
- Mark the sleeves – Decide how short you want your sleeves to be and mark the length with a fabric marker. You can also create a slit or cutout design on the sleeves if desired.
- Cut the sleeves – Use your scissors to carefully cut along the marked lines. Again, be cautious not to cut too much off at once.
- Mark the waistband – Determine how much length you want to remove from the bottom of your sweatshirt and mark it with a fabric marker.
- Cut the waistband – Cut along the marked line to remove the excess fabric. You can also create a cropped or tied-up look if you prefer.
- Finish the edges – To prevent fraying, you can use a sewing machine or hand sew the edges of your cuts. You can also leave them raw for a more distressed look.
People Also Ask
- What materials do I need for this project? All you need is a plain sweatshirt, fabric marker, and sharp scissors.
- Do I need to be experienced in sewing to do this? No, this project doesn’t require any sewing skills. However, you may want to finish the edges of your cuts to prevent fraying.
- Can I customize the design? Absolutely! You can get creative and experiment with different cutout shapes, sleeve lengths, and waistband styles.
- Is this a permanent alteration? Yes, cutting your sweatshirt will permanently change its appearance. Make sure you’re comfortable with the design before making any cuts.
- Can I use this technique on other types of clothing? Yes, you can use this cutting method on t-shirts, tank tops, and even jeans.